FEATURES AND APPLICATIONS
• Friterm FCV 3T series condensers are designed for outdoor installation including 2 different sound levels.     
• The fans arranged in single rows from 1 to 3.
• Capacity range: 6.3÷ 69 kW.

Coil Block
• Staggered tube alignment,
• Internally grooved copper tubes specially for condensers, aluminium fins,
• 2,3 mm of standart fin pitch. Other fin pitches are optional,
• Circuit design are suitable for refrigerants R404A, R507, R134A, R407A and R407C. The mentioned catalogoue capacities are valid for R404A.
• Manifolds and inlet- outlet connections are copper. Schrader valve is supplied on inlet header.
• Standart Test Pressure: 34 bar (PED 2014/68/EU)

CASING
• Condensers have their own self supporting construction and do not require any extra accessories for installation on steel or concrete base.
• Polyester based electrostatically powder painted galvanized steel, which provides excellent UV and corrosion protection, is used for casing. Standard color is RAL 7044.  
• Each fan chamber is separated by internal baffle plates to prevent induced windmilling of off-cycle fans

FANS
• Highly efficient axial EBM, ZIEHL-ABEGG or equivalent fans with diameters 350 mm, 400 mm, 450 mm, 500 mm are used in suction direction for condensers.
     - (S) Standard,
     - (L) Low
• 350/ 400/ 450 mm fans 230V 1~50Hz, 500 mm fan is 400V 3~50Hz, could be run at two different speeds. Furthermore, EC fans with speed control is optional.
• Variable fan speed regulation can be achieved by using three phase fans with frequency inverter and all pole sine filter, guard grilles of fans are standart.
• All motors feature internal protection. Protection class IP 44/ 54; insulation class B/ F.
• Ambient temperature range for outdoor operation is between -25°C and +50°C / +65°C. For standart fans, temperature for outdoor operation can be +75°C depending on the fan type  and working conditions.
• Different fans and motors are optional for high working temperatures.
• Fans are running in a housing designed to maximize air flow rate.
• Friterm reserves the right to use fans of different manufacturers. Depending on the type, the fan data may slightly vary.

SOUND DATA
• Indicated sound pressure levels comply with EN 13487.
• Sound levels are obtained from sound power level data (LwA) of the fan manufacturers.
• Consult an expert for critical sound requirements.

OPTIONAL ACCESSORIES AND OTHER VARIANTS
• Other fin pitches are optional     
• Other fin material options
   - Coated aluminium fins
   - Aluminium magnesium alloy fins
   - Copper fins
• Complete epoxy coated coil      
• Stainless steel casing
• Different color options for casing
• Different connection types
• EC fan    
• Other fan and motor options for high working temperature.
• UV resistant safety switch

» Friterm reserves the right to make modifications in the catalog at any time without prior notice.
» All catalogs are formatted as pdf(Adobe Acrobat). If you do not have the Adobe Acrobat Reader you can get it free by clicking here
» If your internet connection is slow, it is recomended to save the catalogues by right clicking and "Save Target As".